Nihon Kohden MEK6450
Select a location that is flat, level, sturdy, vibration-free and as dust free as possible.
Leave at least 5cm of clearance to the rear of the instrument and 15cm clearance on the left panel to all for adequate airflow and access to connectors.
Maintain a minimum of 8 inches (about 0.2 m) behind the analyzer’s rear panel to allow for heat dissipation and tube clearance.
Place the reagents at the same level as the analyser, either beside or behind the instrument. If you have to place the reagent pack on the lower level, make sure that it is no more than 18 inches (0.45 m) below the level of the analyser’s reagent inlets.